The principle of the X-ray security inspection machine is to use x-ray penetrability to allow luggage to pass through the conveyor belt channel for image collection, to distinguish the color of different items, and the security inspector pays attention to the screen to check suspicious items to achieve the purpose of security inspection and prevent danger article. Here, Xiaohong Peihong introduces the operation steps of x-ray security inspection machine.
Graphic preparation before the operation steps of X-ray security inspection machine
On-site operation steps:
When performing X-rays at the scene, a safety line should be set, the "control area" and "management area" should be determined, and obvious warning signs should be set.
Operators should wear personal dose pens.
X-ray security inspection machine operation steps
1. Remove debris from the X-ray machine conveyor belt channel; check the entrance of the channel and the red emergency stop button on the operating table should be turned clockwise, otherwise the device cannot be powered on; check whether the machine is placed smoothly and the power outlet is connected to the ground wire .
2. Plug in the power, turn the key switch clockwise to the on position, and then press the start button (green button). At this time, the green power lights at both ends of the machine will light up, the whole machine will power on and automatically start the computer; patiently wait for the computer to fully start, Click the X-ray security inspection machine software with the mouse to open the X-ray security inspection machine application program. After a few seconds, the X-ray security inspection machine enters the application interface, the machine starts self-test, the conveyor runs, and the "roller instructions" and "data transmission" buttons are green. .
3. After waiting a few seconds, the machine self-test stops. Click the user button with the mouse or press "F7" on the keyboard to enter the user login interface. Use the numeric keypad to enter the code given by the manufacturer in the login number box and the number in the login password box. Enter "the password provided by the manufacturer" on the keyboard, and then click to log in with the mouse to start using the machine.
4. Click with the mouse or press the (Forward) key on the keyboard, the conveyor will run forward, and the inspected person will place the luggage on the conveyor to start the inspection. When no luggage passes for a long time, click with the mouse or press the keyboard Press the "Stop" key, the conveyor will stop running, and the machine will enter the standby state.
5. When there is no luggage in the aisle, you can click with the mouse or press the (back) key on the keyboard to reverse the conveyor belt. After the luggage is withdrawn, click with the mouse or press the "stop" key on the keyboard to transport The belt stops running. When the luggage is withdrawn, please do not reverse it for a long time, otherwise the conveyor will run off.
6. Press the "ESC" exit key on the keyboard when shutting down. At this time, the prompts "Shut down the computer" and "Return to program" buttons will pop up. Clicking "shut down the computer" with the mouse will exit the X-ray machine application, and clicking "return to the program" will not exit.
7. After exiting to the startup screen of the computer, click "Start-Shut down the computer-Shut down" in turn. The computer will automatically shut down. At this time, you can turn the "Key Switch" counterclockwise to the off position and remove the startup key.
8. After waiting for 30 seconds, the green indicator light of the machine will go out automatically, and the machine will be powered off. After the device is powered off, unplug it and move the machine to a dry and ventilated place for storage.
The above is the introduction of the operating steps of Peihong Electronic x-ray security inspection machine, everyone can find out. In order to achieve a better use effect, the installation environment of X-ray security inspection machine should be dry and ventilated. If the environment is wet, waterproof measures should be taken to extend the service life of the machine.